Grade: 00Cr17Ni14Mo2 316

Chemical composition%

  C≤0.03

Si≤1.00

Mn≤2.00

P≤0.035

S≤0.03

Ni: 12.0-15.0

Cr: 16.0-18.0

Mo: 2.0-3.0

Japan's corresponding grades: SUS316L

American corresponding grades: 316L

British corresponding grades: 316S12

Germany corresponding grades: X2CrNiMo1812

France corresponding grades: Z2CND17.12

Former Soviet Union corresponding grades: 03 × 17H12M2

Also known as titanium steel, 316L stainless steel. Added Mo (2 ~ 3%), excellent resistance to pitting corrosion, excellent high-temperature creep strength. Wuxi Zhongsen too

2, Features
1) cold-rolled products look good gloss, beautiful; 2) the addition of Mo, corrosion resistance, especially excellent pitting resistance; 3) high-temperature strength Excellent 4) Excellent hardening (after processing weakly magnetic) 5) solid solution state non-magnetic; 6) the relative 304 stainless steel, the higher the price.

3, the scope
Pipes, heat exchangers, food industry, chemical industry and so on. 4, the chemical composition% C≤0.03 Si≤1.00 Mn≤2.00 P≤0.035 S≤0.03 Ni: 12.0-15.0 Cr: 16.0-18.0 Mo: 2.0-3.0 5, heat melting point: 1375 ~ 1450C; solution treatment: 1010 ~ 1150C. 7, using state 1) solid solution annealed state:. NO.1,2B, N0.4, HL and other surface state 316L stainless steel containing molybdenum species, due to the steel containing molybdenum, the overall performance is better than steel 310 and 304 under the stainless steel, high temperature conditions, when the concentration of sulfuric acid less than 15% and greater than 85%, 316L stainless steel with a wide range of uses. 316L stainless steel also has a good corrosion performance and chlorides, it is usually used in the marine environment. The maximum carbon content of 0.03 316L stainless steel, need not be annealed and uses a maximum corrosion resistance superior to the corrosion resistance of the corrosion resistance of 304 stainless steel with good corrosion resistance in the pulp and paper production process can be used for performance after welding . And 316L stainless steel is also resistant to aggressive industrial atmosphere and ocean erosion. Heat resistance in intermittent use below 1600 degrees and 1700 degrees continuous use in the following, 316L stainless steel has good resistance to oxidation. In the range of 800-1575 degrees, it is best not continuous role in 316L stainless steel, but the continuous use 316L stainless steel outside this temperature range, the stainless steel has good heat resistance. Resistant 316L stainless steel carbide precipitation performance better than the 316 stainless steel, available above temperature range. Heat treatment in the annealing temperature range of 1850-2050 degrees, then rapidly annealed and then rapidly cooled. 316L stainless steel thermal treatment can not be cured. Welded 316L stainless steel has good weldability. All standard welding methods may be used for welding. Welding according to use, respectively 316Cb, 316L stainless steel or 309Cb welding filler rods or rod. To get the best corrosion resistance, 316 stainless steel welding section needs to be annealed after welding. If you are using 316L stainless steel, does not require annealing after welding. Typical uses pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, piping, exterior building materials used in coastal areas. Also known as titanium steel, 316L stainless steel.

Add Mo (2 ~ 3%), excellent resistance to pitting corrosion, excellent high-temperature creep strength.

2, Features
1) cold-rolled products look good gloss, beautiful;

2) the addition of Mo, corrosion resistance, especially excellent pitting resistance;

3) excellent high temperature strength

4) Excellent hardening (after processing weakly magnetic)

5) non-magnetic solid solution;

6) relative to 304 stainless steel, and higher prices.

3, the scope
Pipes, heat exchangers, food industry, chemical industry and so on.

4, the chemical composition%

C≤0.03

Si≤1.00

Mn≤2.00

P≤0.035

S≤0.03

Ni: 12.0-15.0

Cr: 16.0-18.0

Mo: 2.0-3.0

5, heat treatment

Melting point: 1375 ~ 1450C;

Solution treatment: 1010 ~ 1150C.

7, the use of state

1) solid solution annealed state:

NO.1,2B, N0.4, HL and other surface state.

316L stainless steels containing molybdenum, because the steel containing molybdenum, the overall performance is better than steel and 304 stainless steel 310, high temperature conditions, when the concentration of sulfuric acid less than 15% and greater than 85%, 316L stainless steel with a wide range of purposes. 316L stainless steel also has a good corrosion performance and chlorides, it is usually used in the marine environment.

Maximum carbon content of 0.03 316L stainless steel, can not be annealed and require maximum corrosion resistance after welding can be used for the purposes

Corrosion resistance

Corrosion resistance than 304 stainless steel with good corrosion performance in the pulp and paper production process. And 316L stainless steel is also resistant to aggressive industrial atmosphere and ocean erosion.

Heat resistance

In the intermittent use of 1600 degrees and 1700 degrees continuous use in the following, 316L stainless steel has good resistance to oxidation. In the range of 800-1575 degrees, it is best not continuous role in 316L stainless steel, but the continuous use 316L stainless steel outside this temperature range, the stainless steel has good heat resistance. Resistant 316L stainless steel carbide precipitation performance better than the 316 stainless steel, available above temperature range.

Heat Treatment

Carried out within the temperature range of 1850-2050 ° annealed and then rapidly annealed and then rapidly cooled. 316L stainless steel thermal treatment can not be cured.

Welding

316L stainless steel has good weldability. All standard welding methods may be used for welding. Welding according to use, respectively 316Cb, 316L stainless steel or 309Cb welding filler rods or rod. To get the best corrosion resistance, 316 stainless steel welding section needs to be annealed after welding. If you are using 316L stainless steel, does not require annealing after welding.

Typical uses

Pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, piping, exterior building materials used in coastal areas

How to apply for Returns:

1 If your order need to apply for return, please be sure to call or e-mail by way VANCL customer service center.
Customer Service Tel: 0512-89992846 13382183133
Customer-mail: wqplgr@sina.com

2 Beijing, Shanghai (except Chongming outside), Guangzhou, Shenzhen, Jiangsu, Sichuan, Chongqing, Anhui, Hubei, Hunan, Zhejiang, Shandong, Jiangxi, Fujian, Guizhou, Yunnan, Guangxi, Hainan, and other parts of the region has opened the door to return business, you can access the help center check whether your area has opened the door for return business, please call VANCL For handle customer service hotline.

1) customer service phone after receiving your registration will be time for you to return a single after single registration and distribution staff will return with the goods after the replacement / return single handle return service for your home.
2) When you return home you will be required to handle returned merchandise, along with the invoice to be returned along with the invoice delivery personnel.
3) After the completion and acceptance of goods delivery personnel will be replaced on the spot handed your hands or on the spot for your refund service.
Special Instructions: Select the payment method when ordering original orders for POS machine credit card payment after delivery or goods, will retire in cash when you return to your door handle; other payment methods, we will as soon as possible after receipt of returned goods the return of the purchase price of the original channel. (SMS notification will refund you the financial success)

3 does not support the return of the door handle area, please strictly follow these steps:

1) VANCL call the customer service hotline, customer service staff will help you register for return single;
After two) customer service for you to return a single registration system for you automatically retain stock 7 days, please be sure to return the goods within 7 days to VANCL coffers, seven days after the stock will be automatically released.
3) In order to ensure the timely return of goods after receiving it for you, be accompanied by invoices and invoice orders, please return the goods.
4) We have received your returned merchandise will you return the goods for quality control, and then return operation according to your needs.
5) If the handle returns, refunds will use your original method of payment orders to return, choose to pay cash postal money orders or bank transfer refund. Both methods use the refund to reach your account will take some time, bank transfer will be based inter-bank transfers between different bank credited period and different, postal remittance may be due to the differences between regions and different post office.
6) retirement / replacement parcel receiving address
Address: Wuzhong District, Suzhou City Mudu Mudu Town Road on the 28th (Jinqiao Development Zone)
Zip Code: 21500
Recipient: Metal Materials Co., Ltd., Suzhou same
7) due to the quality of goods

Solemn commitment, where the company sold products are quality problems can enjoy 15 days package returned, and complete technical guidance and improve the service! All of our products pay for materials out of the library report a problem with the sale of goods and materials, for a full refund.

Wholesale
Mixed batch

Support mixed batch, more than [5000] yuan from the grant or [50] kg or more from the grant
Where a single purchase amounted to more than 5000 yuan, you can enjoy 9.8% discount.

One-time purchase amount exceeds 300KG, the Jiangsu Company free delivery, free shipping on all provinces!

What is a mixed batch?
Mixed batch is limited to the range of products and styles, as long as the buyers purchase price (or total) at or above the set amount (or number) you can enjoy the wholesale price.